|
 |
|
 |
|
 Release
Notes : COWON AW1 |
|
What's new in Firmware 2.3.0 (for COWON AW1)
What's new in Firmware 2.0.0 (for COWON AW1)
What's new in PC Manager 1.1.8 (for
COWON AW1)
|
| |
What's new in Firmware 2.3.0 (for
COWON AW1) |
|
|
|
|
| |
-
-
-
-
-
-
-
-
-
-
-
- |
Additional function of wireless format 1)
Additional setting of 'Recording Save Period' 2)
Improved function of 'LED ON during Parking Recording' 3)
Additional function of MAC Address Display 4)
Improved quality of recordings'.
Fixed delay of Smart Manager's Live View.
Fixed errors of recordings' brightness sporadically set rather dark.
Fixed errors of an event alarm--not being initialized?happened when a vehicle is parked.
Shorten the period of time for an event sound effect
Improved function of Motion Detection 5)
Fixed errors of setting time by external GPS.
Fixed other bugs.
1) SmartManager > Settings > Memory Card Information > Formatting the memory card
2) Settings > Recording > Recording Save Period > 1/2/3/4/5 Minutes
3) Settings > Device > Uncheck 'LED ON during Parking Recording'
4) SmartManager > Settings > Device > MAC Address
5) Please adjust the motion sensitivity of AW1 if Motion Detection happens too often. |
| |
|
 |
|
| |
What's new in Firmware 2.0.0 (for
COWON AW1) |
|
|
|
|
| |
-
-
-
-
-
-
-
- |
Motion Sensor Sensitivity extended to nine steps.
Additional setting of 'Use Parking Recording Voltage' 1)
Additional setting of 'Use Auto Shutdown Voltage' 2)
Additional setting of 'Change to Parking Recording Interval' 3)
-Additional setting of 'GPS Speed Unit (mph)' 4)
Additional setting of 'Language of Voice Guide' 5)
Additional way of Settings Initialization 6)
Improved function of GPS speed display.
1) Settings > Recording > Parking Recording > Voltage Settings > Use Parking Recording Voltage
If you do not use Parking Recording Voltage, change to Parking Recording is determined by only
car's movement
2) Settings > Recording > Parking Recording > Voltage Settings > Use Auto Shutdown Voltage
Auto Shutdown Voltage Setting is a function to prevent battery discharge. In general, setting Use
Auto Shutdown Voltage is recommended
3) Settings > Recording > Parking Recording > Change to Parking Recording Interval
4) Settings > Video > ETC > Speed Unit
5) Settings > Audio > Voice Instructions > Language of Voice Guide
6) Settings > Audio > Settings Initialization |
| |
|
|
PC Manager
|
| |
What's new in PC Manager 1.1.8 (for
COWON AW1) |
|
|
|
|
| |
-
-
-
- |
Motion Sensor Sensitivity extended to nine steps.
Additional setting of 'Use Parking Recording Voltage' 1)
Additional setting of 'Use Auto Shutdown Voltage' 2)
Additional setting of 'Change to Parking Recording Interval' 3)
Additional setting of 'GPS Speed Unit (mph)' 4)
Additional setting of 'Language of Voice Guide' 5)
1) Settings > Recording > Parking Recording > Use Parking Recording Voltage
If you do not use Parking Recording Voltage,
change to Parking Recording is determined by only car's movement.
2) Settings > Recording > Parking Recording > Use Auto Shutdown Voltage
Auto Shutdown Voltage Setting is a function to prevent battery discharge.
In general, selecting Use Auto Shutdown Voltage is recommended.
3) Settings > Recording > Parking Recording > Change to Parking Recording Interval
4) Settings > Video > Speed Unit
5) Settings > Audio > Voice Instructions > Language of Voice Guide |
| |
|
|
|
Firmware
